My IC-9700 is configured as TRX2 in RUMlogNG, and I want RUMlogNG to remain the only application with a direct CAT connection to the radio. Satellite Bridge is a small macOS app that brings MacDoppler's satellite frequencies into this existing setup.

Satellite Bridge showing QO-100 Digital selected, four saved pairs, separate RX and TX readback, and RF power at 4%
Satellite Bridge 1.0.4: QO-100 Digital is active, MacDoppler is blocked, and the reported power is within the 5% limit.

Why I made it

QO-100 is my regular operating environment, with different frequency pairs for digital modes, SSB and CW. At the same time, I like to let MacDoppler track LEO satellites in the background. I wanted to check a workable pass with one click, then return to a QO-100 pair while MacDoppler continues tracking without disturbing my operation.

What it does

  • QO-100 presets: click a named pair to set both frequencies and modes once. After that, manual tuning stays under the operator's control.
  • MacDoppler control: select MacDoppler to forward its continuing Doppler corrections. Downlink controls RX and uplink controls TX independently.
  • Clear source selection: the active button shows who controls tuning. Incoming MacDoppler packets remain visible even when blocked.
  • Converter protection: QO-100 uses a monitored maximum RF power setting of 5%, because the transmit output feeds a converter.
  • Live readback: the app displays the frequencies reported by RUMlogNG, including manual radio tuning.

The control path stays simple: MacDoppler → Satellite Bridge → RUMlogNG TRX2 → IC-9700. The bridge receives UDP reports and sends the selected tuning commands to RUMlogNG; RUMlogNG keeps the CAT connection.

The first public preview is version 1.0.4 for Intel Macs. The app, source code, illustrated guide, setup instructions and current limitations are available on GitHub: matpet/satellite-bridge, with downloads on the release page.